Advantages Of Sheet Metal Design

Metal in sheets is known as sheet metal. These plates are thinner than plate metal (0.25 inches) but thicker than a foil (0.006 inches). These plates are available in steel and aluminium in various thickness, coatings for corrosion resistance or surface finish. A large cast of metal is taken and rolled into long ribbons of desired thickness. These long flat pieces are then rolled into a coil or cut to pieces before sending to the warehouses.

Sheet metal design is done by punching the approximately shaped mould onto the metal. The machines used for such design is capable of making specific designs which are very intricate. The moulds are punched into the sheet many times till the desired results are obtained. These punches could be hundreds or thousands in a minute. 

Another method of designing on a metal sheet is by using Melbourne laser cutting tools. These laser tools are capable of vaporizing half-inch steel plate with 0.05 inch precision. The laser cutting machines also have auto loading capabilities and blazing cutting speed. The disadvantage of these machines is that only straight edges can be cut by them. All 3d features available on their counterparts cannot be obtained by these powerful cutters. Absence of tools makes the whole size limited and thus need proper attention. Painted and galvanized metals can produce gaseous cyanide or chlorine when come in contact with lasers, care should be taken while cutting such materials. Laser machines are quite expensive with a good cutting speed but cutting is limited to only straight lines.

Read More

What Are The Methods For Custom Metal Fabrication In Melbourne?

Metal fabrication is a process which cuts, molds or shapes a metal into a desired shape. Metal components such as metal rods, metal bars and metal sheets are available in various dimensions. At times the demand for a unique product would call for custom metal fabrication in Melbourne. Making of a unique product would require a huge amount of planning and designing. To get best results the following custom design services are followed.

• Conceptualizing: Provides a general idea about the look, characteristics, and features of the product.
• Computer aided designing: Would provide the manufacturers with a 3-D look of the product
• Tool designing: For developing any part of the product if a particular tool is required which is not available, and then the tool is made.

Once the designing part is done, the actual manufacturing process is begun. Some of the common metal fabrication methods are 

• Casting: Hot liquid metal is put into a mould and allowed to cool and harden. 
• Drawing: Force is exerted on the molten metal to get the desired dye, the force varies according to the color required
• Forging: Force is used to get the metal into the desired shape.
• Punching: Uniquely shaped small pillars are punched into the metal to make decorative designs on the metal. This process is also called as sheet metal punching.
• Welding: Heat and pressure are used to attach two or more pieces of metal.
• Drilling: A drill is used to make circular holes on the metal.
• Milling: Special machines called milling machines are used to make non circular holes
• Turning: A cutting tool shapes the metal piece while it spins on its axis.

Some custom metal products require finishing treatments like combining two or more components into one component. Other secondary services include painting, screwing etc to give the final look.

Read More

Make The Exact Custom Component Parts By Using Sheet Metal Punching

Metal is a good and long lasting item. It can be used for different types of purposes.  If you find the companies, which have their name in market, then you will get surety of 100% satisfaction. They have served their sheet metal punching services to many industries. Their various services include laser cutting, punching, fabricating, etc.   

They are using high quality laser machines to give their customer laser cutting services in Melbourne. They have specialist who cut the metal in exact shape. Their main mission is to give their customer the right metal sheet. Experienced companies are offering verities of metal products at an affordable price. You will see accuracy in their work. They have customers who are recommending others to take the benefit of their services.

One of the best thing about these places is they have immense stock of metal toolboxes. Such toolboxes can be used for keeping tool properly. You will not find any other better companies like these. State your need and you will have a nice shiny looking metal.

They utilize new technologies for making a delicate design on the metal. Trusted companies have a unique procedure for making a metal sheet. They never compromise in providing the exact metal, which you have expected. If you want to get your metal product in less time, then these places are ideal. If you want to explore more details about their products and its features, then check their website. Stay in touch with them to read about their new updates. See the testimonial section available on their website.

Visit the leading places, if you want to get long lasting value for money metal items. You can take the help of classified sites to find the address of these places. Get your desired products in your desired time and place and you will be happy to make the right decision.

Read More